[Bas] Super-Strong Mold Gel 150g

Have you ever experienced mold inside the washing machine rubber packing?

On the surface, it may look clean, but there can be a lot of mold inside the rubber packing.

Use Bas Strong Mold Removal Gel for a clean, odorless family laundry.

Washing Machine Rubber Packing Usage

Apply the mold removal gel onto the rubber packing and let it sit. Afterward, wipe it with a dry towel or cloth and then run the standard washing mode.

* If the washing machine has had mold for years, it might be difficult to remove it with one application. Please try several times.

04

Non-Dripping Gel Type

This gel formula is viscous, so it adheres strongly to the wall without dripping even when applied to vertical surfaces.

Its thin nozzle allows a controlled amount to be dispensed, making it ideal for use on grout, tile gaps, or bathroom silicone joints.

05

Non-Pungent Odor

The unpleasant chlorine smell typical of bleach is minimized to the greatest extent! Meanwhile, mold is removed quickly and effectively.

* Test results may vary by conditions.
* Bleach contains chlorine components and sodium hypochlorite which may cause a strong bleach smell; ensure ventilation when using.

06

Convenient Storage Container

Flat cap - store it standing up.

How to Use

1. Wipe the area you want to use dry.
2. Apply the mold removal gel about 3mm thick on places where mold exists.
3. Leave it for about 2-3 hours.
4. Wipe clean afterward.

* For severe mold or heavy dirt, removal may be difficult with just one application. Please use repeatedly and gently scrub with a brush if needed.

Precautions

Some imported tiles and silicone in the bathroom may discolor or deform, so please test on an inconspicuous area before use.

• Follow the specified usage instructions and store separately by type such as bathroom silicone or floor tile silicone to avoid discoloration.
• Do not use for purposes other than intended, and be sure to apply only on washing machine rubber packing.
• Seal the cap tightly after use to keep the product fresh.
• Avoid exposure to direct sunlight or extreme temperatures.
• Do not use with other chemicals to prevent dangerous reactions.
• Avoid contact with eyes, and if contact occurs, rinse thoroughly with water and seek medical advice.
• Avoid ingestion. If swallowed, do not induce vomiting and seek immediate medical attention.
• Keep out of reach of children.
• Use in well-ventilated areas.

Safety confirmation and product labeling

Registration No.: EB20-01-1258

Product type: detergent, mold remover

Product name: Bas Strong Mold Removal Gel

Use: detergent - general (bathroom, kitchen), toilet, drain cleaner

Other product types: tile cleaner, disinfectant - general (general cleansing and mold removal)

Ingredients: emulsifier

Weight: 150g

Active ingredient: alkali agent

Usage restrictions: laundry detergent, dishwashing detergent, detergent additives

Miscellaneous: water-based, brush type

Manufacturer: Sungan Chemical Co., Ltd.

Manufacturer date: separately marked

Expiration date: 5 years from manufacturer date

Country of origin: South Korea

Seller: (주)리젠

Customer service: 1899-8012